The Boiler Room: GOLD CORPORATE MARKETING PARTNER Unilux Advanced Manufacturing

Unilux is the world’s original 5 pass forced draft bent tube boiler wit no room for inaccuracy. With over thirty years of manufacturing and operational experience in just about every industry requiring boilers, Unilux stands alone as the most pristine, highly engineered, ultimate quality boiler in it’s class. While the product speaks volumes, our success is our people; many with over 25 years at Unilux, we take enormous pride in every unit we manufacture. From immediate response to inquiries, performance data, drawings, product description and assistance with proper selection, everyone at Unilux has one important goal in mind…customer satisfaction. Unilux QA/QC boasts a stringent, internal program that emphasizes employee responsibility to safety, product and quality performance.

Richard Fisher of The Boiler Room: Unilux Advanced Manufacturing - Construction for all Unilux boilers starts with the vessel. All vessel material is controlled, ASME compliant material. Generous upper and lower drums are joined with large, external downcomer(s) allowing for maximum internal circulation. Tubes are a minimum 1.5” diameter, SA 178 Grade “A” material. Tube sizes up to 2.5” diameter are used for larger boilers. The Unilux housing is the most rigid available. Individual steel panels are manufactured with 11 gauge steel and reinforced by bending and welded stiffeners throughout. Refractory design is exclusive to Unilux. We utilize a three tier pour of different tolerance refractory for ultimate performance. All Unilux refractory is warranted for 5 years as standard. Finished insulated jacket panels are scratch resistant, polyester impregnated powder coat. Thermal losses from housing and jacket are 0.5 percent. The completed enclosure allows for up to +5” water column gas side pressure. All Unilux boilers are available with fuel burning equipment and control systems as desired.

Safety is paramount at Unilux. Every Unilux boiler has been engineered to be the safest, most efficient product available in its class.

At Unilux Boiler Corp., we engineer and manufacture bent water tube boilers of only the finest quality, built by experienced craftsmen and backed by a service history that is second to none. When others decline custom engineered projects, Unilux embraces the challenge with experienced, thought provoking ideas and the ability to assist engineers, contractors and end users with the most efficient, long lasting solutions to effectively meet their needs.

HeatSponge SIDEKICK Warning, Finally Revealed: Boiler Room Equipment, Inc

Fisher Capital on Boiler Room Equipment, Inc, is very proud to finally unveil the SIDEKICK line of condensing boiler economizers for commercial and industrial hot water boilers. The Sidekick has been in development for nearly two years and represents an evolutionary development of high-efficiency installations in the boiler industry. The SIDEKICK is a warning game changer the likes of which have not been experienced since the introduction of the first condensing boilers. The SIDEKICK offers the ability to integrate condensing boiler efficiencies to conventional boilers on a new or retrofit basis. The SIDEKICK allows a customer with a conventional boiler system the ability to realize condensing efficiency gains that otherwise would require the existing boiler to be demolished and replaced with a new condensing boiler. Conventional, non-condensing boilers can now realize the efficiency benefits of outdoor air temperature reset controls and lower circulating hot water loop temperatures. Sidekicks also allow for duel fuel condensing applications utilizing conventional boilers. The SIDEKICK features all stainless internal construction, stainless tubes and fins, and an insulated outer casing. Inspection and clean out ports make periodic maintenance and cleaning easy.
The efficiency of the SIDEKICK goes far beyond simply energy recovery to the ultra-productive process in which it is selected and designed. Heat recovery for condensing applications introduces a significant number of variables that makes a catalog-approach to equipment selection nearly impossible. Boilerroom Equipment has developed a new method of quantifying heat recovery, the Recovery Rate, and integrated this into the design. The incorporation of the Recovery Rate variable allows a customer to custom tailor the level of heat recovery and cost directly to the requirements of each specific application. We define this new concept in heat recovery design as 3D Modularity, for modular construction in three dimensions. Based on a "Mass-Customization" approach to product development, Bruce will consider all of the application design constraints and will design a SIDEKICK optimized to meet the exact performance requirements at the most competitive price. Bruce has been given the ability to consider all aspects of the heat exchanger design relative to the price of the equipment and generate a fully priced proposal all in real-time; a software and engineering accomplishment that added over one thousand hours of coding and heat transfer modification to Bruce's core program. This means Bruce can handle all inquiries and generate proposals in real time by himself. The near elimination of sales and support overhead and significantly reduced project execution overhead requirements the Bruce software provides allows us to offer a product superior to any before it at pricing and responsiveness levels no conventional competitor could hope to match.
Bruce will go on-line live on Monday December 21st with full public access to the Sidekick software. BEI will display the SIDEKICK in public at the upcoming AHR Exposition in Orlando, booth 3126. We will also have other HeatSponge models on display and based on the popularity in Chicago last year will bring the HeatSponge NASCAR Late Model stock car back for another display appearance.

New Options in Guided Boring, Fisher Capital Equipment Management Update

The Akkerman team, continually committed to increasing the

versatility of our products, recently launched several new

components for our GBM line of equipment.

Fisher Capital Equipment leasing news update from different  suppliers. Fisher Capital Equipment Management leasing gives you fresh events and updates on Construction Machineries, Suppliers Directory and Others to keep away from scam from Unsolicited, "Pre-Qualified credit line" mass mailings

The Powered Reaming Head (PRH) upsizing kit for its Guided

Boring Machine (GBM) system was released. This GBM accessory

allows owners to bore multiple pipe diameters with just one

set of 11” OD (279 mm) thrust casings and augers. The base

14” (356 mm) OD PRH unit features 16” (406 mm) and 20” (508

mm) OD increaser kits and corresponding pipe adapter rings to

accommodate up to 20” (508 mm) OD pipe. All PRH components

rest on a customized rack for ease of transport and orderliness

on the job site. The PRH front and rear sections can be launched

separately to accommodate minimal diameter shafts. The PRH

kit performs well with all Akkerman power packs and jacking

frames.

The P150Q Power Pack provides hydraulic power to the GBM

jacking frame and Powered Cutter Head for smooth and efficient

operation. The P150Q houses a 154 HP (115 kw) diesel engine.

Its three load-sensing variable displacement axial piston pumps

independently operate the jacking, rotation and PCH. It also

features a 100 gal (378 L) fuel tank and 50 gal (189 L) hydraulic

oil reservoir.

The Jetting and Lubrication pump underwent a design

reconfiguration for enhanced compactness. It features

independent hydrostatic flow connections, bulkhead

connections for pressure and return lines and an easily

serviceable open/close valve on the tank outlet. Customers may choose the 3,000 rpm, 30 HP (7 kW)

diesel engine or 1,750 rpm, 30 HP (7 kW) electric motor. Each 325 gal (1,230 L) tank is positioned sideby-

side on a pallet-like base. The 2,500 psi (17,237 kPa) high-pressure jetting pump assists the GBM

system’s excavation process by lubricating cutter bits and spoils. An in-line suction filter protects the

pump from contaminants in the water. The 150 maximum psi (1,034 kPa) lubrication pump flows at 4

gpm (15 L/min) and features an agitator which mixes the lubrication quickly and keeps it consistent

throughout production.

For more information on these and other GBM products, please contact our friendly sales staff or an

international representative.

Akkerman Inc. is positioned for sales in new markets with recently established representation

in the Middle East, India, Russia and Singapore. Agreements with Trenchers Land Digging

& Filling LLC, based in the United Arab Emirates, Asia Contech Ltd. of India, Intertorg Russia and

ICE Far East in Singapore pioneer exciting prospects for Akkerman Inc. worldwide.

Trenchers Land Digging & Filling LLC of Dubai recently facilitated the sale of a complete Guided

Boring Machine (GBM) system for a Kuwait contractor. This sale denotes the first GBM system

sold in the Middle East as well as the most powerful pilot tube microtunneling configuration

available. The 4812A jacking frame with 200 tons of thrust, 275T power pack, Powered Cutter

Head and Jetting and Lubrication pump will install DN 300-1,000 mm pipes for drives up to

150 m long.

Asia Contech Ltd. of New Delhi, providing sales and service of Akkerman equipment in India,

also represents trenchless companies American Augers, ASTEC and Trencor. ICE Far East

of Singapore, a south east Asia office for International Construction Equipment (ICE) will

represent Akkerman in this region. Intertorg of Moscow, a US based company with expertise

in the Russian trenchless market, has been a longtime dealer for Ditch Witch and previously

represented Lovat, Soltau and MTS equipment.

Akkerman welcomes these organizations into its community of sales representatives. Tunnel

Engineering Services in the United Kingdom, Ditch Witch of Australia, Virtual Engineering of

Columbia and the Alinea Group of Mexico have been agents of Akkerman for many years.

Additional representatives have been appointed in Egypt, Turkey, Bulgaria, Poland, Brazil, Italy

and Pakistan. For a full listing of equipment representatives, please review the “Contact Us”

page on the Akkerman website.

Komatsu America Corp. Introduces the WA1200-6 Wheel Loader

Fisher Capital News Update: Keep updated on recent events, press releases and latest machineries to avoid scam.

FISHER CAPITAL CONSTRUCTION MANAGEMENT - Construction Machineries, Suppliers Directory and Others. Meets EPA Tier 2 Emissions Regulation With More Horse Power, Reliability, Durability, Lower Fuel Consumption, Increased Productivity, Enhanced Operator Cab and Easier Maintenance, 1892 Gross HP (SAE J1995), 1765 Net HP (SAE J1349) @ 1800 rpm, Engine RPM control system with auto deceleration New variable transmission cut-off system, New dual-mode active working hydraulic system, Additional torque converter cooler, Increased hydraulic cooling capacity, Extended service intervals

Rolling Meadows, IL, September 8, 2010 — Komatsu America Corp. (KAC) today introduced its new WA1200-6 Wheel Loader for use in mining applications. Based on extensive customer input and feedback, the new loader includes environmental, technological and ergonomic enhancements for even greater productivity, while lowering operating costs.

The new WA1200-6 is powered by a highly-efficient Komatsu SAADA16V160E-2 engine that delivers 1892 Gross HP at 1800 RPM. With an operating weight of 477,100 lbs., the new loader offers increased fuel efficiency, while meeting all EPA Tier 2 emissions requirements.

Special features of the WA1200-6 include:

Productivity Performance

The engine net output of the WA1200-6 has been increased by 132 HP to 1765 HP at 1800 RPM. The use of an electronic governor results in low fuel consumption, with quick throttle response to match the machine’s powerful tractive effort and fast hydraulic response.

The new dual-mode active working hydraulic system allows the operator to select between normal and powerful loading, while the optimum oil flow in the working system increases efficiency and reduces cycle times. Increased engine output and the optimized hydraulic system provide outstanding production and performance.

Operator Enhancements

The engine RPM control system with auto deceleration allows the operator to set the engine RPM at the optimum work performance level and control speed smoothly with the accelerator. The variable transmission cut-off system for the left brake pedal is adjustable by a switch at the operator’s seat. When loading, the low setting reduces brake impact to prevent spillage, while the high setting can be used for traveling.

Improved Reliability and Durability

An additional torque converter cooler was added as standard equipment to reduce oil temperature and increase cooling capacity. For hydraulic cooling, a new pump with increased oil capacity was added and the circulation was revised to lower oil temperature. Two additional air cleaners were added and the size of the elements increased to 15 inches for more capacity.

Komatsu America Partners with Pedregon Racing, Two-time NHRA Funny Car world champion Tony Pedregon’s Chevrolet Funny Car will feature primary sponsorship from Komatsu America Corp. for the O’Reilly Auto Parts NHRA Nationals, Sept. 17-19, at Charlotte, NC.

“Komatsu America is excited to be sponsoring Tony Pedregon’s car,” said Erik Wilde, Vice President, Product Marketing, Komatsu America Corp. “Tony’s reputation as a world champion aligns well with Komatsu’s world-wide reputation for producing outstanding equipment.”

Komatsu will also be an associate sponsor on the Pedregon Racing Funny Car and on Cruz Pedregon’s Snap-on Racing Tools Funny Car, with races slated for Sept. 23-26 at Dallas, TX, Oct. 7-10 at Reading, PA, Oct. 28-31 at Las Vegas, NV, and Nov. 11-14 at Pomona, CA.

“Komatsu is an international leader in the field of construction and mining equipment,” said Pedregon during the announcement. “We are pleased to promote awareness of the brand to our race fans as well as the Komatsu dealers and their customers.”

Tony Pedregon is one of 10 Funny Car drivers competing for final positions in NHRA’s Countdown to 1 playoffs. This weekend’s event is the second of six title-deciding races.

Komatsu America Corp. is a U.S. subsidiary of Komatsu Ltd. which is the world’s second largest manufacturer and supplier of construction, mining and compact construction equipment. Komatsu America also serves forklift and forestry markets. Through its distributor network, Komatsu offers a state-of-the-art parts and service program to support the equipment. Komatsu has proudly been providing high-quality reliable products for nearly a century. Visit the website at www.komatsuamerica.com for more information.

LBX and Sumitomo Sumitomo (S.H.I.) Construction Co., Ltd. Acquires

Fisher Capital News Update: Keep updated on recent events, press releases and latest machineries to avoid scam.

FISHER CAPITAL CONSTRUCTION MANAGEMENT - Construction Machineries, Suppliers Directory and Others --100% Ownership of LBX Company.

Sumitomo (S.H.I.) Construction Machinery Co., Ltd. (SCM), a leading manufacturer of hydraulic crawler excavators headquartered in Tokyo, Japan, announced today that effective as of April 30, 2010 it has acquired full ownership of LBX Company (LBX) headquartered in Lexington, KY.

LBX was originally formed as part of a global alliance between SCM and Case Corporation, and holds the manufacturing rights to SCM's excavator products in North and Latin America. LBX has been marketing and selling Sumitomo excavators, forestry, material handling and demolition products under the Link-Belt excavator brand name since the company's formation.

"This acquisition underscores SCM's dedication to LBX and the Link-Belt® excavator brand, and will contribute greatly to our success and expansion throughout North, South and Central America," stated Robert Harvell, CEO of LBX Company. "Over the years, our long-term relationship with SCM has been built on a solid foundation of providing superior product quality, innovative designs, and dedicated commitment to our dealer network and customers."

"We believe that this acquisition will allow both LBX and SCM to achieve our common long-term global growth strategies," said Kensuke Shimizu, President of Sumitomo Construction Machinery.

Since its formation, LBX has passed several growth milestones, including the creation of a corporate campus in Lexington, KY that includes a world-wide parts distribution center, product testing grounds, training facilities and testing and service bays. Additionally, the Link-Belt® excavator products have evolved to meet the needs of today's marketplace, including the introduction of new models such as the Link-Belt® 360 X2 Rubber Tire material handling excavator, which was unveiled at the ISRI Convention last week in San Diego, CA.

"We look forward to working very closely with SCM in the development of future products and our dealer network to further expand our position in the marketplace," Harvell said.

The management team of LBX will remain in place.

Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning from aaliyaabbott - Netvibes | Bargains Bookmarked By Us

The share market has come down hard on Fisher & Paykel Appliances - with its shares falling 40 per cent after the company issued a profit warning today. The whiteware manufacturer's shares, which were worth $2.94 this time last year and worth $1 on Friday, went into free fall and are currently trading at just 60 cents, a 40 cent fall. Earlier today the company said it expected a net profit of $25 million to $30m, down up to 54 per cent on last year. Due to the deterioration in the New Zealand dollar, Fisher & Paykel Appliances' total bank debt grew $122 from March last year to $512m at the end of January. It was predicted to be $570m by the end of March. It is now looking at reviewing its capital structure and alternative sources of capital. Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning - The market was very concerned the company had to come back with a capital raising, which was unexpected, said Hamilton, Hindin, and Greene director Grant Williamson. The home appliance market had dropped off in all areas Fisher & Paykel exported to and there did not appear to be too many signs of a turnaround in world housing at the moment, he said. "I think investors are starting to say; how long is it going to be before conditions change for the company? I think that's the biggest concern." Williamson said Fisher & Paykel Appliances' wares were sold into most new homes but when very few new homes being built it would have a serious effect on their sales. A 40 per cent drop in share value was a big hit for the share price to take but that was the general state of the market. "If any company disappoints the market then the market is very harsh on their share price and we have certainly seen that this morning with Fisher & Paykel Appliances." The company announced it would not proceed with a capital note issue and was looking an alternative source of capital. The directors were considering the merits of issuing equity, including to a cornerstone investor. Williamson said he did not believe a capital notes rising would have been particularly well received. He did not see any short term bounce in the price until there was clarification around the structure of equity rising. That was expected to be announced in early March. "At the moment there's still a fair degree of selling in the market place, around the 60c level."- NZPA Fisher Capital Management Equipment Leasing Construction Machineries, Suppliers Directory, business or construction machineries and other 

Xanga Weblog Tags 쨩 fishercapitalwarning | hotklix | Bargains Bookmarked By Us

Fisher capital management avoid boiler room - Hot Hubs 

from magiemiles07 - 30 minutes ago 
Fisher Capital Equipment Update - Market Slams Fisher and Paykel on Profit Warning Viiii Birmingham, AL -- (SBWIRE) -- 12/20/2010 -- The share market has come down hard on Fisher & Paykel Ap... 
Bargains Bookmarked By Us | Best Bargains For fisher capital management warning tips 

from magiemiles07 - 2 hours ago 
Fisher Capital Equipment Management - Significant Progress On Dulles Metrorail Posted in Other by devonnickson 1 day 15 hours ago (http://www.articlesnatch.com) ... 
Triad Boiler Room Systems Launched New Commercial Boilers 

from jhinochoy - 2 days ago 
FOR IMMEDIATE RELEASE New Kensington, Pennsylvania, United States of America (Free-Press-Release.com) December 15, 2010 -- Fisher Capital on Boiler Room Equipment, Inc: Triad Boiler Systems manufactures un

Fisher Capital Equipment Update - Market Slams Fisher and Paykel on Profit Warning Viiii | Clipmarks | Bargains Bookmarked By Us

Fisher Capital Equipment Update - Market Slams Fisher and Paykel on Profit Warning Viiii 

Birmingham, AL -- (SBWIRE) -- 12/20/2010 -- The share market has come down hard on Fisher & Paykel Appliances - with its shares falling 40 per cent after the company issued a profit warning today. The... 
Richard Fisher: Robert Brown’s Boiler Installation-bb 

Richard Fisher on Boiler room management - with the current state of the economy, it is extremely important that you are fully aware of the ways in which you can make savings around your home, along with the... 

Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning | Clipmarks | Bargains Bookmarked By

Due to the deterioration in the New Zealand dollar, Fisher & Paykel Appliances' total bank debt grew $122 from March last year to $512m at the end of January. It was predicted to be $570m by the end of March. 
Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning - The market was very concerned the company had to come back with a capital raising, which was unexpected, said Hamilton, Hindin, and Greene director Grant Williamson. 

Triad Boiler Room Systems Launched New Commercial Boilers | Richard Fisher | Bargains Bookmarked By Us

Fisher Capital on Boiler Room Equipment, Inc: Triad Boiler Systems manufactures uniquely rugged small-footprint hot water boilers, steam boilers, and radiant heating systems. All our boilers use 12 gauge firetubes in compact vessels that fit through very small doorways! Inputs range up to 2,000,000 BTU's. Create a highly efficient system with millions of BTU's by sequencing a string of these modular vessels. 



TRIAD's commercial boilers and industrial grade Hot Water Heating, Domestic Hot Water, and Steam boilers are used in a wide variety of applications. Our commercial boilers are used at schools, universities, apartments, hospitals, office buildings, retirement communities, and churches. Industrial uses have included bakeries, smelting operations, food processing, quenching systems, and various heating applications for manufacturing. Triads’ modular boilers and radiant heating systems can be natural gas fired, oil fired, or dual fuel fired. For simplicity of operation and maintenance, all controls on our boilers are well known, off-the-shelf products. There area no proprietary parts on these boilers! This simplicity of operation is part of our philosophy, and an important reason why our customers return to us again and again. 

TRIAD has been manufacturing high-quality boilers since 1926, and developed the modular boiler concept with primary/secondary piping, receiving a patent for it in 1967. We put this experience, knowledge, and expertise into every boiler. 

We believe in quality - it is the overriding characteristic driving our company. This is why we manufacture extremely rugged, well-designed hot water and steam boilers that can provide decades of dependable service. We welcome your inquiries. 

Benefits of Modularity 
TRIAD's elegantly simple design maintains consistent water volume where heat is required. 

Boilers are activated sequentially, drawing water from the main loop into the next hot water boiler until the heating need is meet., firing boilers remaining isolated, so no heated water circulates through cold boilers. During most of the year the unfired boilers provide additional backup. Outdoor temperatures and loop water temperatures are constantly monitored. 

Fisher Capital on Boiler Room Equipment, Inc: The efficiency of this design is most apparent during warmer months, when a conventional hydronic heating or steam boiler could still be operating at full capacity. 

Primary-Secondary Piping 
TRIAD integrates modularity with a single pipe primary-secondary system. TRIAD was the first company to employ a Primary-Secondary concept. It operates with two loops, (i) the primary loop, or building main loop, and (ii) smaller secondary loops off of each hot water boiler, which supply heated water to the primary loop.